Sony
Sony LMD-2110MD 21.5-inch Full HD 2D LCD Medical Monitor
The Sony LMD-2110MD monitor features a 21.5-inch LCD panel of full HD (1920 x 1080) resolution and 10-bit signal processing. Complying with medical safety standards and EMC standards, the monitor provides a crisp, sharp high definition image.
With input versatility, the LMD-2110MD is equipped with an analogue video input and output terminals as standard. It also features an HDMI input, which accepts HD signals up to 1080/60P. In addition, the monitor can input HD/SD-SDI signals using an optional input adaptor.
- Cost-effective feature-rich performance
- Optional HD-SDI interface
- Full HD-resolution LCD panel
- Wide range of standard input interfaces
- Remote Control
- VESA mounting
- Dimensions - 515 x 403 x 264 mm (with stand)
- Dimensions - 515 x 355 x 86 mm (without stand)
- Compliance with medical standards
- Sutiable for - Microscopy, Endoscopy
- 1 year Sony warranty
Cost-effective feature-rich performance
Full HD-resolution LCD panel
Wide range of standard input interfaces
Optional HD-SDI interface
Compliance with medical standards
Remote control
VESA mounting
| Picture Performance | |
|
Type
|
a-Si TFT Active Matrix LCD
|
|
Resolution
|
1920 x 1080 pixels (Full HD)
|
|
Effective picture size (H x W) (Diagonal)
|
477 x 268 mm (18 7/8 x 10 5/8 inches), 547 mm (21 5/8 inches)
|
|
Aspect
|
16:9
|
|
Colors
|
Approx. 16.7 million colors
|
|
Viewing angle (LCD panel specification)
|
170°/160° (typical) (horizontal/vertical contrast >10:1)
|
| Input | |
|
Composite
|
BNC (x1), 1.0 Vp-p ±3 dB sync negative
|
|
Y/C
|
Mini DIN 4-pin (x1) Y: 1.0 Vp-p ±3 dB sync negative, C: 0.286 Vp-p ±3 dB (NTSC burst signal level), 0.3 Vp-p ±3 dB (PAL burst signal level) |
|
RGB, Component
|
BNC (x3) RGB: 0.7 Vp-p ±3 dB (Sync On Green, 0.3 Vp-p sync negative) Component: 0.7 Vp-p ±3 dB (75% chrominance standard color bar signal) |
|
HDMI
|
HDMI (x1)
|
|
Audio
|
Phono jack (x2), –5 dBu 47 kilohms or higher OPTIONAL AUDIO IN: Phono jack (x1), –5 dBu 47 kilohms or higher |
|
External sync
|
BNC (x1) 0.3 Vp-p to 4.0 Vp-p ±bipolarity ternary or negative polarity binary |
|
Option in connector
|
D-sub 9-pin (x1), female
|
|
Parallel remote
|
Modular connector 8-pin (x1) (pin-assignable)
|
| Output | |
|
Composite
|
BNC (x1), loop-through, with 75 ohms automatic termination
|
|
Y/C
|
Mini DIN 4-pin (x1), loop-through, with 75 ohms automatic termination
|
|
RGB, Component
|
BNC (x3), loop-through, with 75 ohms automatic termination
|
|
External sync
|
BNC (x1), loop-through, with 75 ohms automatic termination
|
|
Audio monitor out
|
Phono jack (x2), loop-through
|
|
Speaker (built-in)
|
0.5 W (mono)
|
| General | |
|
Power requirements
|
AC 100 V to 240 V, 50/60 Hz
|
|
Power consumption
|
Maximum: approx. 60 W, 1.0 A to 0.5 A
|
|
Operating temperature
|
0°C to 35°C (32°F to 95°F)
Recommended: 20°C to 30°C (68°F to 86°F) |
|
Operating humidity
|
30% to 85% (no condensation)
|
|
Storage and transport temperature
|
-20°C to +60°C (-4°F to +140°F)
|
|
Storage and transport humidity
|
0% to 90%
|
|
Operating, storage and transport pressure
|
700 hPa to 1060 hPa
|
|
Dimensions (W x H x D) (with stand)
|
515 x 403 x 264 mm (20 3/8 x 15 7/8 x 10 1/2 inches)
|
|
Dimensions (W x H x D) (without stand)
|
515 x 355 x 86 mm (20 3/8 x 14 x 3 1/2 inches)
|
|
Mass
|
8.6 kg (18 lb 15 oz)
|
|
Mass (without stand)
|
6.9 kg (14 lb 19 oz)
|
|
Supplied Accessories
|
AC power cord (1)
AC plug holder (2)
Before Using This Unit (1)
CD-ROM (including the Instructions for Use) (1)
Service Contact List (1)
|
Domestic Shipping Rates
For all orders placed we use a fully tracked service using one of our approved couriers.
|
FREE |
Tracked 24 Service - on all net orders over £100.00* delivered within the U.K. |
| £4.95 | Tracked 24 Service - on all net orders under £100.00* delivered within the U.K. |
International Shipping Rates
All orders being shipped to Europe will be sent from our European Warehouse. This will allow fast and efficient deliveries with no Brexit issues and delays from the UK.
For all orders placed we use a fully tracked service using one of our approved couriers. If you are based outside of Europe and your desired country is not listed in our shipping table, then please contact us for a quote.
Zone 1
Countries - Austria, France, Germany, Italy, Poland and Spain.
| Price | Transit Time |
| €6.95 | 1-2 Days |
| €4.95 | 3-5 Days |
| FREE** | 1-2 Days |
Zone 2
Countries - Belgium, Czech Republic, Denmark, Estonia, Finland, Greece, Hungary, Latvia, Lithuania, Luxembourg, Sweden, Netherlands, Portugal, Romania, Slovakia and Slovenia.
| Price | Transit Time |
| €6.95 | 2-3 Days |
| FREE** | 2-3 Days |
Zone 3
Countries - Bulgaria, Cyprus, Ireland and Malta.
| Price | Transit Time |
| €6.95 | 6-9 Days |
| FREE** | 6-9 Days |
Shipping Terms
Please note the following:
-
The order cut-off time for same day dispatch is 12pm Monday to Friday. Orders placed after this time will be treated, for the purposes of delivery, as having been placed the next working day.
- All items are available from stock in the U.K. unless stated in the product description.
-
Deliveries may require a signature to confirm receipt. If a signature cannot be obtained, the carrier may ask a neighbour to sign for the delivery. Deliveries that require a signature will not be left if a signature cannot be obtained. If the carrier leaves the delivery with a neighbour or at your local post office, they will leave a card for you telling you where it is.
-
You may, when placing your order online, specify a different delivery address than your payment address if that is more convenient for you.
-
All delivery timescales are approximate and subject to availability. The precise timing of a delivery cannot be specified.
* net orders over £100.00
** net orders over €120.00
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unopened or unused, and in its original packaging. You’ll also need the receipt or proof of purchase.
To start a return, you can contact us at sales@newmenmedical.co.uk. If your return is accepted, we’ll send you instructions on how and where to send your package. If the item is faulty we will provide a returns label otherwise we request you return using a tracked postage method.
You can always contact us for any return question at sales@newmenmedical.co.uk.
Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.
Exchanges
The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.
Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method. Please remember it can take some time for your bank or credit card company to process and post the refund too.